Pro Fet IV
13
REAR PANEL
Moreover you can simulate different pickup
characteristics:
Each pickup has a peak in its resonance frequency
in excess of which no treble can be transmitted.
The main distinction in sound characteristics
between different pickups is that this frequency is
located elsewhere depending on pickup types. This
is what you can obtain in combination of MID
boost and HIGH cut by shifting the simulated
resonance frequency with the TONE control (12
o'clock until full clockwise position). However it
requires that the resonance frequency of your bass
pickups lies beyond that of the desired simulation.
Furthermore you can pre-adjust the desired basic
sound characteristics with the TONE control, and
use the LOW B/C, MID B/C, HIGH B/C and
EQ ON/OFF switches as preset switches.
You can also take advantage of the option to add
the limiter automatically only when the graphic
EQ is activated.
MAINS IN AC Terminal with integrated fuse
compartment for connecting the amplifier to the
current network.
GROUND LIFT switch isolates the earth
connection from the ground of signal. Should
several devices be simultaneously connected to
earth by the same conductor as well as via line
connections, a so called hum loop might appear. In
this case operate GROUND LIFT to eliminate the
current hum (when pressed).
TUNER OUT socket for the connection of a tuner.
When MUTE mode is activated, the unmodified
bass signal is retained here.
LINE OUT socket allows to connect additional
power amplifiers or active speakers.
EFF. LOOP for the insertion of effects units.
Connect SEND with the input and RETURN with
the output of the effects device.
EQ ON/OFF FOOTSWITCH allows to connect
a footswitch for activating/bypassing the graphic
EQ. To do so use a switch (latch) and not a key
(unlatch).
SPEAKER OUT for supplying loudspeaker
cabinets. One XLR and one Speakon socket are
provided. Both are connected in parallel. The
signal from the Speakon outputs is leaded by 1+
and 1-.
MAINS IN
WA RN I N G:
High Voltage inside. To pre-
vent electric shock do not
open cover. Refer servicing to
qualified service personnel. To
avoid fire hazard, replace fuse
with same type and rating. To
avoid electric shock hazard, do
not operate this equipment in
rain or wet environment.
GROUND
LIFT
TUNER
LINE OUT
EFF. SEND
EFF. RET.
SERIAL NO.
TYPE: WARWICK PRO FET IV
WARWICK AMPLIFICATION GERMANY
EQ ON/OFF
FOOTSWITCH
SPEAKER OUT 400W/4 OHMS
(8 Seiten)
(16 Seiten)
(14 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern